Lawnmaster Ocumow™ Robot Lawn Mower and Cordless Trimmer Combo for Small Yards

The OcuMow Robot Lawn Mower is designed for small to medium-sized lawns up to 2000 square feet. It comes supplied with 2 batteries and can be easily converted into an edger, providing a 2-in-1 tool for your yard maintenance needs.

Optical Navigation Technology takes the guesswork out of yard work. The robot mower uses sensors and a wide-angle, high dynamic range camera to identify grass, even under extreme contrast lighting conditions, allowing it to navigate your lawn efficiently.

The OcuMow is equipped with two ultrasonic sensors that detect obstacles and automatically redirect the mower to avoid them, even small objects as small as 6 inches. Additionally, the included 33-feet of magnetic wires can be used to create a virtual fence, preventing the mower from entering any forbidden areas.

For best results, a clearly defined edge around the full perimeter of your lawn is required to prevent the mower from leaving the grass. As with other robot mowers, a grass trimmer is needed to trim the lawn edges.

The cordless grass trimmer features a 10-inch cutting width with an adjustable assist handle for enhanced user comfort. The trimmer has an auto line feed, 5-position pivoting head, and a 90° rotating shaft, allowing you to manicure edges or tight areas with precision.

The OcuMow can handle complex lawns, climbing slopes up to 35% (19°) thanks to its deep tread wheels and powerful drive system. It can mow for up to 3 hours, covering 1000 square feet per battery, and can cut up to 2000 square feet using the supplied two batteries, although this may vary due to terrain and slope conditions.

The robot mower is designed to be placed on the lawn once or twice a week and should be stored in a dry place between uses. As it requires good light for the camera to function, the OcuMow can only be used during the daytime.

The OcuMow comes with the robot mower, 10-inch cordless grass trimmer, 2 x MX 24V MAX* batteries, 24V battery charger, 33-feet of magnetic strip, 12 x magnetic strip pegs, and extra 3 blades. There is no need for an outdoor power socket, boundary wire, or app setup - simply set the robot mower on the lawn, push the start button, and let it get to work.

*Maximum initial battery workload voltage (measured without a workload) is 24 volts. The nominal voltage is 21.6 volts. Robot runtime is based on the time for the included battery to deplete with no load and will vary depending on use case.

product information: